- Oil Mill Machinery
- Oil Refinery Machinery
- Oil Processing Plant
- Solvent Extraction Plant
- Animal Oil Processing Machine
- Feed Processing Machine
- Palm Oil Mill
- Industrial Drying Machine
- Grain Processing Machinery
NEWS
What Problems May Occur During The Discharging Process Of The Dryer?
Time:Wed-11-21 hits:
Today we will take a look at the common problems and solutions that may occur during the discharging process of the dryer.
During the use of the dryer, some problems will inevitably occur at the discharge port:
1. The raw materials are not dried at one time
Cause of:
(1) The dryer is too small.
(2) The calculation of the air pressure and flow rate of the wind network is incorrect.
(3) Improper use of the dryer.
Solution:
(1) Increase the drying temperature, but this method is likely to cause fire in the dryer. The correct method is to replace or re-modify the drying equipment.
(2) The manufacturer is required to recalculate the wind pressure and flow rate before providing a design change plan based on the actual situation.
(3) Negotiate with the manufacturer to obtain the equipment manual and learn the correct usage method.
2. Discharge from the separator chimney
Cause of:
(1) The separator is too small.
(2) There is a problem with the separator design.
(3) The wind pressure of the wind network is calculated incorrectly.
Solution:
(1) Replace or modify the separator.
(2) Negotiate with the manufacturer to resolve.
(3) Negotiate with the manufacturer to resolve.
3. The material is not evenly wet and dry, and the front rod can not be normal
Cause of:
(1) Improper use of drying equipment.
(2) The raw materials become agglomerates.
Solution:
(1) Negotiate with the manufacturer to obtain the equipment manual and learn the correct usage method.
(2) The agglomerated raw materials are broken up and then dried.
There are not many types of common discharge problems in dryers. If you really don’t understand the cause of the machine failure, you can also contact your supplier.
We provide a complete set of engineering equipment for plant and animal oil processing, and a complete set of processing equipment such as cooking machines, presses, dryers, crushers, centrifuges, thickeners, evaporators, etc., adopting mature European technology, and provide solutions for construction, installation, commissioning and operation Training.
