- Oil Mill Machinery
- Oil Refinery Machinery
- Oil Processing Plant
- Solvent Extraction Plant
- Animal Oil Processing Machine
- Feed Processing Machine
- Palm Oil Mill
- Industrial Drying Machine
- Grain Processing Machinery
NEWS
Maintenance And Repair Of Oil Press
Time:Tue-11-21 hits:
1. The lubrication should be checked after every 50 hours of work. The oil cup above the reduction box must not be short of oil. The inner bearing of the Yuantong screw shaft adjustment screw should be drawn from the adjustment screw hole and filled with butter. Dry grinding is strictly prohibited.
2. The lubrication parts should prevent the intrusion of dust and other impurities. The oil quality of the gearbox should be checked once a year. If any deterioration is found, all the oil should be replaced.
3. When the squeezing volume decreases and the cake or oil output is abnormal, the squeezing screw shaft should be drawn out, and the wear of the squeezing screw, squeezing strip, cake head and cake outlet should be checked, and the worn parts should be replaced in time.
4. After each oil squeezing, the screw shaft should be removed to clean the residue, and at the same time, use a dry cloth and a cotton swab to scrub the rotating port to prevent clogging.
