- Oil Mill Machinery
- Oil Refinery Machinery
- Oil Processing Plant
- Solvent Extraction Plant
- Animal Oil Processing Machine
- Feed Processing Machine
- Palm Oil Mill
- Industrial Drying Machine
- Grain Processing Machinery
NEWS
How To Solve The Problem That The Oil Press Does Not Produce Oil?
Time:Thu-12-21 hits:
The problem of the oil press has always been the top priority of the oil press. Everything in the oil press plant cannot bypass the oil press, so the problems with the oil press are also diverse.
The following are the analysis of common problems that the oil press does not produce oil:
1. The temperature of the press chamber is too low.
2. The material is too wet or too dry.
3. The material is damp and moldy, and the seed material is not full and there are too many impurities.
4. The cake table is thick or too thin.
5. The oil line is blocked.
6. Improper installation of the squeezer will cause no oil to flow out, and oil will leak easily if it is too loose.
7. The thickness of the cake is adjusted to less than 1.5mm.
Solution:
1. Increase the temperature.
2. Adjust moisture.
3. Moldy and deteriorating oil should not be squeezed, even if the oil can be squeezed out, thick eating is harmful to human health.
4. Adjust the thickness of the cake table.
5. Disassemble the press chamber and clean the press sliver.
6. Adjust the tightness of the squeezing sliver installation. It is advisable to use a wooden hammer for the last squeezing sliver, and replace all the severely worn squeezing slivers with new ones. 7. Replace the cake outlet and the snails.
We provide a complete set of engineering equipment for plant and animal oil processing, and a complete set of processing equipment such as cooking machines, presses, dryers, crushers, centrifuges, thickeners, evaporators, etc., adopting mature European technology, and provide solutions for construction, installation, commissioning and operation Training.
