- Oil Mill Machinery
- Oil Refinery Machinery
- Oil Processing Plant
- Solvent Extraction Plant
- Animal Oil Processing Machine
- Feed Processing Machine
- Palm Oil Mill
- Industrial Drying Machine
- Grain Processing Machinery
NEWS
Why Is The Peanut Sheller Making So Much Noise?
Time:Thu-07-22 hits:
Due to the rapid development of the peanut industry, manual shelling has been unable to keep up with the demand for peanuts.
Manual peeling is not only easy to make fingers tired and injured, but also inefficient. Therefore, people in peanut production areas urgently need to use machines to replace manual peeling.
The emergence of peanut shelling machines has improved this situation, so that farmers in flower production areas no longer need the traditional way of shelling, which can greatly reduce their labor intensity and greatly improve the efficiency of shelling.
However, during use, machine noise is unavoidable. The noise of the peanut sheller is also relatively large.
The main sources of noise are: the vibration and running friction of the frame, fan, rotor, vibrating screen and other components.
Fan noise generation mechanism: When the fan rotates, it will cause a vortex of the surrounding airflow, which will interfere with the air. At the same time, the fan itself will resonate with the wind protection ring to generate noise.
Part of the mechanism of mechanical noise: The main reason is that the piston hits the cylinder, and the fundamental reason is that there is a gap between them. When reciprocating, the lateral force on the piston undergoes a sudden change in direction. Influencing factors: piston clearance, offset of piston pin hole, piston height, number of piston rings, thickness of cylinder liner, lubrication conditions, etc.
Hydraulic system is an important noise source of construction machinery.
One of the main sources of noise in hydraulic systems is the oil pump.
Studies have shown that the noise characteristics of hydraulic valves are mainly related to three factors: the type of valve, the flow direction of the fluid in the valve, and the pressure in the recirculation cavity.
These three factors largely determine the noise of the hydraulic valve. During the movement, various parts of the hydraulic machinery collide and rub against each other, which will generate a lot of noise.
Today's hydraulic equipment is developing in the direction of high speed, high pressure and high power, and there is still a long way to go for the development of low-noise technology.
We provide a complete set of engineering equipment for plant and animal oil processing, and a complete set of processing equipment such as cooking machines, presses, dryers, crushers, centrifuges, thickeners, evaporators, etc., adopting mature European technology, and provide solutions for construction, installation, commissioning and operation Training.
Keywords: peanut sheller, peanut oil press pretreatment, peanut oil press machine, sheller,
We provide a complete set of engineering equipment for plant and animal oil processing, and a complete set of processing equipment such as cooking machines, presses, dryers, crushers, centrifuges, thickeners, evaporators, etc., adopting mature European technology, and provide solutions for construction, installation, commissioning and operation Training.
Keywords: peanut sheller, peanut oil press pretreatment, peanut oil press machine, sheller,
